climber touches the finish pad, the clock will display the finish time
alternating between minutes and seconds (MM:SS) and seconds and
hundredths (SS.HH).
A start input or a double click from the pushbutton will reset and
start the clock any time the running time is displayed.
Test Mode
Mode 16
Equipment required:
Depends upon testing.
Set up:
Follow specific instructions from CTS customer service representa-
tive.
Operation:
The clock displays 16, indicating mode 16. It will then cycle through
a digit test. Note that the decimal after the third digit is never used,
and will not light during the digit test.
Input ports can also be tested. When an input port receives a signal
the clock shows which input port was triggered, as shown:
Touchpad
PAd
Relay Platform
rJP
Start
StAr
Reset/Breakout
rSET
Other Modes
Modes 3 -- 15
All other modes are not used. The clock displays the mode number,
and then displays nA.
Counting Clock Operation
4
