Color Kinetics LL011L360WW120000, Руководство по обслуживанию

Страница: 29 / 42

Repair Maintenance Guide
29
D
Note
An RGB Light Engine module can
only be modified in predefined
sizes steps of 60 mm (2.4 in), in
length direction.
D
Note
Always use new white gloves
while handling RGB Light Engines.
4.2.4.1 Adjust the length of an RGB Light Engine
Required tools:
• White gloves
• A junior hacksaw
• A new utility knife
• A tape-measure
• A felt tip pen
Figure 34, RGB Light Engine.
To resize the RGB Light Engine module the following four steps must be
followed. These are described each separately.
1 Determine the required size.
2 Cut the green sub PCB.
3 Mark the carrier plate.
4 Cut the carrier plate.
Size determination
Use the table below to determine the correct data for
both following steps.
Shortening data
LED strips Sub PCB cutting position Carrier plate cutting position
5 A 60 mm
4 B 120 mm
3 C 180 mm
W
L Sub PCB
LED strips