Collomix Xo 1R, Оригинальная инструкция по эксплуатации

Страница: 9 / 110

hands or insert any other objects into it while mixing
is in progress. Risk of crushing!
►
Only operate the machine and the mixing tool in
perfect condition. Do not use damaged, bent or worn
paddles.
► Wait until the machine or tool comes to a complete
standstill. Rotating tools can snag and cause injuries
or damage.
► If the sound pressure level should exceed 85 dB (A)
where you are working, use ear protection!
► We recommend that you wear work gloves and pro-
tective goggles when using the mixer. Regulations
require that you wear close-fitting clothing.
► To protect yourself from harmful dust while mix-
ing, wear a dust mask. Some mineral materials are
deemed to be carcinogenic. Use a dust extractor
wherever possible.
► Always connect machines via a residual current device
(RCD) with a rated residual current of 30 mA or less.

WARNING
:
Read all notes and instructions on
safety. Failure to observe any of the notes and instruc -
tions on safety may result in an electric shock, fire and/
or serious injury.
Make sure that you keep all notes and instructions on
safety for future reference.
To be able to use the machine safely it is essential that
you read the operating instructions and the safety
instructions thoroughly and comply with all of them.
The machine is to be used only by persons who have
read the operating instructions and who are acquainted
with the occupational safety and accident prevention
regulations in force in your country.

In addition, you must also comply with the gen -
eral safety instructions also included with the machine.
►
Take care to ensure that the mains power supply cor-
responds to the specifications on the rating plate.
► Do not use the device in any environments with
potentially explosive atmospheres. Do not mix any
readily flammable solvents or solvent-containing
substances with a flash point of below 21° C.
► Take care to ensure that no liquid splashes against
the motor housing and keep it away from the rain –
risk of electric shock!
► Never clean the machine with water – risk of electric
shock!
► Do not wind cables or leads around any parts of your
body.
► Do not use the machine with a damaged cable. Do not
touch the cable and pull out the power plug immedi-
ately. There is an increased risk of electric shock from
damaged cables. If the mains power cable has to be
replaced (because of damage or similar), ensure that
it is replaced by the manufacturer or an authorized
representative of the manufacturer (electrician) in
order to avoid any risk to safety.
►
Always hold the machine firmly with both hands
when carrying out your work and make sure you have
a secure footing.
► Hold the machine by the insulated grip surfaces when
carrying out work where it may be possible for the
plug-in tool to come into contact with concealed
power cables or the machine’s own mains power
cable. Contact with a live cable may make metal com-
ponents of the machine live as well and could cause
an electric shock.
► Before starting up, check that the mixing rod is se-
curely attached and rotates without a hitch.
► Start up and run down the machine in the mixing
container only. Ensure that the mixing container is
stood in a firm and secure position.
► Do not reach into the mixing container with your
Machine-specific safety instructions
Read and observe the operating
instructions for the machine before you
start it up!
Always wear protective goggles and ear
protection while working.
It is advisable to wear a dust mask
whenever working with materials which
generate large amounts of dust.
Always wear protective gloves while
working.
EN