4
5
ENGL
IS
H
Batteries
1. Open the receiver’s battery compartment on the back and insert
2 × AAA/LR03 batteries. Note the markings on the bottom of
the battery holder to ensure correct polarity.
2. Refit the battery cover.
Transmitter
Table stand
Fold out the stand on the back of
the transmitter. 2-position stand.
Note:
If the stand is over-extended it will release its grip from its mount to
prevent damage. Refit the stand back into its mount and it will function
normally again.
Batteries
1. Open the receiver’s battery compartment on the back and insert
2 × AAA/LR03 batteries. Note the markings on the bottom of
the battery holder to ensure correct polarity.
2. Refit the battery cover.
Connecting the transmitter to
the receiver
Things to consider:
• Other wireless equipment using the same frequency can reduce
the transmission range.
• The range of all wireless equipment depends on the type of obstacles
located between the transmitter and the receiver (e.g. a concrete wall
will interfere with the signal more than a plasterboard wall).
If you experience problems, try the following:
• Turn off any other existing wireless equipment to check whether this
is the cause of the problem.
• Reposition the wireless equipment, shorten the distance between
the transmitter and the receiver or reduce the number of obstacles
(walls, furniture, etc.) between them.
