Coline CW1296, Руководство пользователя

Страница: 8 / 36

ENGL
IS
H
8
Boil-dry protection
If you should turn on the kettle while it is empty the boil-dry protection will activate and
automatically turn off the kettle. Let the kettle cool before attempting to use it again.
Care and maintenance
Always unplug the lead from the power point and let the kettle cool down properly
before cleaning it. If necessary, the exterior of the kettle can be wiped with a lightly
moistened cloth.
Descaling
Due to the natural occurrence of calcium in water, limescale deposits may form in
the kettle after some use. Limescale deposits might lengthen the time needed for water
to boil. For descaling you can use a mixture of white vinegar and water or a special
descaler which can be purchased from well-stocked grocery stores.
1. Mix 100 ml of white vinegar (12 %, not regular vinegar) with 300 ml cold water or
follow the directions included with the descaling agent.
2. Pour the mixture into the kettle and turn it on. Boil up the mixture 2 times, and then
pour it out.
3. In order to remove the last remnants of limescale and descaling agent, the kettle
should be filled to the max mark with fresh cold water. Turn the kettle on and let it
come to the boil.
4. Pour out the water and repeat this process 3 times. The kettle is now ready to use again.
The kettle should be descaled after 2–3 months daily use or whenever it has visible
limescale deposits.
Cleaning the filter
Clean the filter in the spout regularly.
Instructions:
1. Carefully push the top of the filter
down so that the snap lock detaches
from the housing.
Note: Be careful as the edges of
the filter bracket are sharp.