Coleman CHD200, Руководство пользователя

Страница: 6 / 20

2. First Use 5
2. First Use
2.1 Installing the Batteries
1.Undo the latch and open the camera.
2.Insert 4 x AA size batteries. Make sure to insert the batteries in the
direction noted on the camera.
When using a power adaptor (not included), open the rubber seal on the
bottom of the unit and insert the DC plug. Please note when a DC plug is
inserted into the camera, the camera cannot be opened. The plug needs to
be removed first.
2.2 Inserting the Memory Card
Insert the SD memory card (not included) to record and store your videos and
photos. When the battery is low, media stored on the memory card will not be
erased. Please insert the SD memory card by following the steps below:
1. Undo the latch and open the camera.
2. Insert the memory card in the slot shown below. Ensure that the metal
contacts are inserted first. Push the memory card in until you hear an
audible click.
The memory card can only be inserted in one way. Do not force the
card in if it will not go in smoothly.
3. Close the camera door and close the latch.
4. To remove the memory card, simply push in and the card will eject back out.
NOTE:
x
Please format the memory card before using the camera
(Caution, this will erase all data on the card).
x
Do not remove or insert the memory card when recording. It
may damage the card or cause data loss.
x
Memory card rating must be Class 10 or above.