Coleman CHD200, Руководство пользователя

Страница: 13 / 20

3. Using Your Cam ĞƌĂ
‘Password Protection’ and press the OK button to enter the ‘Password
Protection’ submenu.
2. Press the LEFT or RIGHT buttons to navigate the menu and the OK
button for your selected setting ( On, Off ).
3. If ‘On’ was selected, set the password by pressing the LEFT or RIGHT
buttons to change the number of the highlighted digit. Press the OK
button to switch to the next digit.
4. After setting all 4 digits press the OK button to return to the ‘Password
Protection’ menu, press the MENU button to exit the ‘Password
Protection’ menu.
Note: Once password protection is turned on, you will be required to
enter the password each time you turn on the camera. If your forget the
password, turn the camera off and press and hold the MENU and PLAY
buttons together and slide the switch to SETUP. The camera will now
be unlocked and password protection is turned off. Follow the steps
above to turn password protection on.
3.1.15 Beep Sound
This setting allows you to turn the button press sounds on and off.
1. In the Settings Menu use the LEFT or RIGHT buttons to select
‘Beep
Sound’ and press the OK button to enter the ‘Beep Sound’ submenu.
2. Press the LEFT or RIGHT buttons to navigate the menu and the OK
button for your selected setting ( On, Off ).
3.1.16 Format Memory Card
The format setting erases all photos, videos and data stored on your
memory card.
1. In the Settings Menu use the LEFT or RIGHT buttons to select
‘Format
Memory Card’ and press the OK button to enter the ‘Format Memory
Card’ submenu.
2. Press the LEFT or RIGHT buttons to navigate the menu, press the OK
button for your selected setting ( Yes, No ).
NOTE: This will delete all of your media and cannot be undone.
3.1.17 Serial Number
This function allows you to set a custom serial number to the camera.
1. In the Settings Menu use the LEFT or RIGHT buttons to select
‘Serial
NO’ and press the OK button to enter the ‘Serial NO’ submenu.
2. Press the LEFT or RIGHT buttons to navigate the menu, press the OK
button for your selected setting ( On, Off ).
3. If ‘On’ was selected, set the serial number by pressing the LEFT or
RIGHT buttons to change the number of the highlighted digit. Press the