background image

Operation

1.  Position the apparatus on a firm level surface  
 

away from any heat sensitive material and  

 

switch the unit ON.

2.  If an incubation temperature of 37ºC is  
 

required, press the pre-set temperature  

 

switch to the top.

3.  If another incubation temperature is  
 

required, press the pre-set temperature  

 

switch to the bottom (variable) and set the  

 

temperature as follows:

 

SI60:

 Turn the temperature control knob  

 

clockwise to the desired setting. The load  

 

indicator will remain lit until the desired  

 

temperature setting is reached at which time  

 

it will flash.

 

SI60D:

 De-press and hold the press to set  

 

switch and turn the temperature control  

 

knob until the desired temperature appears  

 

on the display. On releasing the switch, the  

 

display will revert to the actual temperature  

 

of the incubator. The load indicator will  

 

remain lit  until the desired temperature  

 

setting is reached at which time it will flash.

Maintenance & Servicing

 

WARNING: Ensure the unit is   

 

disconnected from the mains  

 

electricity supply before attempting  

 

maintenance or servicing.

Periodically clean the instrument using a damp 
cloth and mild detergent solution. Do not use 
harsh or abrasive cleaning agents.

Any repairs or replacement of parts MUST 
be undertaken by suitably qualified 
personnel.

For a comprehensive list of parts required by 
service engineers conducting internal repairs, 
please contact the Service Department, quoting 
both the model number and serial number:

Email: [email protected]
Tel: +44 (0)1785 810475 

Only spare parts supplied or specified by 
Cole-Parmer or its agents should be used. Fitting 
of non-approved parts may affect the 
performance of the safety features designed into 
the instrument. If in any doubt, please contact 
the Service Department of Cole-Parmer or the 
point of sale.

For any other technical enquiries, please contact 
the Technical Support Department:
Email: [email protected] 
Tel: +44 (0)1785 810433.

Spares and Accessories

Description 

Catalogue Number

Fuse 3.15AL 

ESM3C15(S)

Thermal Fuse 

ESI6020(S)

Potentiometer and Lead 

T55

Transformer T45(S)
Heater HSI6005(S)
Base Plate 

SI60/1

Shelf System 

SI60/2

Gaunlet Front Panel 

SI60/3

Gaunlet (per pair) 

SI60/4

Tray SI60/5

Warranty

Cole-Parmer Ltd. warrants this equipment to be 
free from defects in material and workmanship, 
when used under normal laboratory conditions, 
for a period of 

three (3)

 years. In the event of a 

justified claim, Cole-Parmer will replace any 
defective component or replace the unit free of 
charge. This warranty does NOT apply if damage 
is caused by fire, accident, misuse, neglect, 
incorrect adjustment or repair, damage caused 
by installation, adaptation, modification, fitting 
of non-approved parts or repair by unauthorised 
personnel.

Cole-Parmer Ltd,
Beacon Road,
Stone,
Staffordshire,
ST15 0SA,
United Kingdom
Email: [email protected]
Tel: +44 (0)1785 810475
Web: www.stuart-equipment.com

Содержание Stuart SI60









Отзывы: