Cole Parmer Stuart CP152B, Инструкция по эксплуатации

Страница: 53 / 56

English English
52
Glossary of Icons
Heating Target icon - turns white when heating turned on and displays the target
temperature will flash twice to show selected. The minimum set-point is 25
O
C
Stirrer Target Icon - turns white when stirrer turned on and display stirrer temperature
will flash twice minimum setting 50 rpm
Heater Hockey Stick Line - turns red when the heating mode is selected and working
correctly
Stirrer Hockey Stick Line - turns blue when the stirrer mode is selected and working
correctly
Degrees Centigrade - once the target temperature is reached the degrees C turns red
RPM
- once the target speed is reached the RPM text turns blue
Probe Icon - when the probe icon is connected the probe connected icon appears and
will stay solid until disconnected where the icon will fade out
Warning Icon - When an error is detected the warning triangle will be displayed
Error Code - when an error is detected an error code is displayed. The graphics change
to white with fade in and out
Hot LED - This LED will flash when the top plate becomes too hot to touch and while
the temperature is above 50
O
C for up to 30 minutes, even if the unit is disconnected from
the electricity supply
Setup Icon - when selected in the menu carousel, you can set the brightness level of
the display
Program Icon - when selected in the menu carousel, you can program either a single
stage or multi stage program where you can enter the time, heater temperature, stirrer
speed and pulse options depending on the model type
About Icon - when selected in the menu carousel, it will display the software program
installed on the unit and Cole-Parmer contact details
Illumination Icon - sets the brightness of the display, with 1 being the darkest and 10
the brightest. The optimal setting is 5 mid range setting
Back Arrow Icon - allows you to step back to the menu carousel or back to the
programming main screen
Multi Stage Icon
- when selected during programming the multi stage option is
enabled
250
1200
C 250
1250
RPM
1
HOT
Time Duration Icon - during programming, you can set the time duration of the run
Heat Temperature Icon - during programming, you can set the heater temperature
of the run
Stirrer Speed Icon - during programming, you can set the stirrer speed, the minimum
speed is 50 rpm. If set to “ ---” the speed is off. If you have got the speed set to off
and then enable the pulse, the speed automatically changes to 50 rpm
Pulse Icon - during programming if the pulse is set to ON, the stirrer is on for 30
seconds and off for 10 seconds. If you have the speed set to 200rpm and the pulse ON
the motor will be on at 200rpm for 30 seconds and )rpm for 10 seconds
Add Program Icon - allows you to add a new program to the unit
Up Icon
- during programming the function keys will be displayed, this icon will add a
new program above the existing program
Edit Icon - during programming the function keys will be displayed, this icon allows you
to edit the existing program selected
Delete Icon - during programming the function keys will be displayed, this icon allows
you to delete the existing program selected
Play Icon - during programming the function keys will be displayed, this icon allows
you to play the program selected
Down Icon - during programming the down icon will be displayed, this icon will add a
new program below the existing program
Green Lines
- when a program is running the white lines turn green to show the
program is running
Stop Icon - when the program is running the stop icon is displayed, when selected is
stops the program running and returns to the man programming screen