Cole Parmer RS-200 Series, Инструкция по эксплуатации

Страница: 14 / 36

14
Page 18 of 41 M7886 issue 8.41
Figure 10: ‘Module Missing’ Error Message
If you are using an older type of dry block (version without internal temperature sensor) the
main menu screen will look like the illustration.
Figure 11: No Internal Temperature Sensor (Old Dry Block Design)
If you are using a new design of dry block the main screen menu will look like the illustration.
Figure 12: Internal Temperature Sensor (New Dry Block Design)
If you have the external probe attached for measuring sample solution content the main
screen menu will look like Figure 13: External Temperature Probe Attached below. Note the
e
character next to the temperature display when external probe is connected.
Figure 13: External Temperature Probe Attached
7.5. Stir Speed Setting and Activation
From the main display screen menu press the
>
key to enter the ‘ stir spee d’ setting screen.
Note: The stir speed displayed is that of the last setting made by the user.
Figure 14: Stir Speed
Press the
>
key to enter the stir speed selection screen.
Figure 15: Setting the Stir Speed (Image 1)
Press the
^
key to make the 100’s value selection. Press the
v
key if you wish to reduce the
selected stir speed value.
Press the
>
key to
go into the 10’s selection scr
een.