2.5 Environment, storage and use
•
Maximum altitude: 2000 m
•
Pollution degree: 2
•
This product is a precision instrument and it should be used in a proper environment for optimal use
•
Install your product indoors on a stable, vibration free and level surface in order to prevent this instrument to
fall thereby harming the operator
•
Do not place the product in direct sunlight
•
The ambient temperature should be between 5 to +40°C and humidity should be within 20 to 80% RH
•
Although the system is anti-mold treated, installing this product in a hot, humid location may still result in the
formation of mold or condensation on lenses, impairing performance or causing malfunctions
•
Never turn the right and left focus knobs in opposite directions at the same time or turn the coarse focus knob
past its farthest point as this will damage this product
•
Never use undue force when turning the knobs
•
Make sure that the microscope system can dissipate its heat (fire hazard)
•
Keep the microscope away from walls and obstructions for at least approximately 15 cm
•
Never turn the microscope on when the dust cover is in place or when items are placed on the microscope
•
Keep flammable fluids, fabric, etc. well out of the way
Disconnect power
Always disconnect your microscope from power before doing any maintenance, cleaning, assembling or replacing
LEDs to prevent electric shocks
Prevent contact with water and other fluids
Never allow water or other fluids to come in contact with your microscope, this can cause short circuiting your device,
causing malfunction and damage to your system
Moving and assembling
•
This microscope is a relatively heavy system, consider this when moving and installing the system
•
Always lift the microscope by holding the main body and base of the microscope
•
Never lift or move the microscope by its focusing knobs, stage or head
•
When needed, move the microscope with two persons instead of one
3. Models
The MSS-200 Series is available in two different models, with a choice of stand. They are equipped with 45° inclined
tubes and a zoom system with a pair of widefield WF 10x/21 eyepieces.
Model
Type
Magnification
Working distance
Stand
Illumination
Power
Weight
78904-66
Trinocular
0.7 to 4.5x
100 mm
Pillar
Incident (3 W LED);
transmitted (3 W LED)
100–240 VAC,
50/60 Hz
10.4 lb (4.2 kg)
78904-69
Trinocular
0.7 to 4.5x
100 mm
Rack & pinion
Incident (3 W LED);
transmitted (3 W LED)
100–240 VAC,
50/60 Hz
7.3 lb (3.3 kg)
5
