9 \ USER OPERATION MANUAL:
FHD-400 Series
Cole-Parmer
®
coleparmer.com
3 .4 Set Up
Your Cole-Parmer product is shipped in two parts
. The following instructions and photos explain how to:
Assemble the base “enclosure” and place the head unit (fan and controls) on top:
•
Fit the main filter and the pre-filter.
•
Fit the optional airflow meter.
•
Adjust the fan speed/airflow control.
•
Adjust the filter blockage alarm.
Prior to beginning assembly, ensure the following:
1 . Area is free of obstructions, tripping hazards, etc .
2 . Ample clearance is available on sides and over head .
3 . Appropriate number of personnel are on hand: two people recommended .
Fume Hood Assembly
1 . Unpack fume hood enclosure and set on
top of casework . In most cases the enclosure
is shipped fully assembled. If unit is flat packed,
please follow “flat-packed enclosure
assembly sheet” .
2. Unpack fan/filter module (aka head unit). Lift
head unit above and onto enclosure, allowing
airflow sensor/wire harness to hang
inside the
enclosure .
