Cole Parmer 05017-10, Руководство пользователя

Страница: 21 / 45

Vacuum Oven 6-3 Cole-Parmer
Section 6
Operation
Establishing
Operating Conditions
Table 7: Program Edit Mode (Menu 6)
Step Key Entry Action Display
1
Press MENU until PSET is
displayed, then press SET
Unit enters the program edit mode
and points to MONday, step 1. Use
the UP/DOWN keys to select the
day and step.
MON1
2 Press UP or DOWN
Unit displays the program time
then press SET. for the current
step. Hour digits are flashing. Use
the UP/DOWN keys to adjust hour.
08:00
AM •
3 Press SET
Minutes digits are flashing. Use
the UP/DOWN keys to adjust
minutes.
08:00
AM •
4 Press SET
Step time and temperature set-
point is displayed. Setpoint is
flashing. Use the UP/DOWN keys
to adjust setpoint.
08:00
280
5 Press SET
Program step time & pump status
is displayed. Pump ON or OFF is
flashing. Use the UP/ DOWN keys
to switch pump ON or OFF.
08:00
OFF
6 Press SET
Unit displays the program day,
step and
ʻ
N ?
ʼ
prompt. Use the
UP/DOWN keys to adjust prompt
to Y to accept or N not accept.
08:00
N ?
7
Press SET, then MENU to exit
or SET again to continue
Unit displays the next program
step. To exit the edit session press
MENU, or press SET to view or
edit another step.
MON2
8 Press MENU to exit
Unit displays COPY/NO. This
option will copy 8 steps forward
to each day through the end of
the week. Use the UP/DOWN
keys to adjust prompt to Y or N.
NO
Establishing the operating conditions consists of setting the desired
temperature program and establishing the desired environmental
conditions, e.g., vacuum, inert gas atmosphere, or both. Instructions
pertaining to connecting a vacuum pump and/or gas supply to the oven
are given under the INSTALLATION AND ASSEMBLY section of this
manual. Before establishing conditions, be certain that all steps given
under the aforementioned section have been completed.
Main Controller
Menus (continued)