COLDWAVE MPPD-12CRN1, Руководство пользователя

Страница: 7 / 21

SLEEP OPERATION
Press this button, the selected temperature will increase(cooling) or
decrease(heating) by 2 1 30 minutes.The temperature will then increase
(cooling) or decrease (heating) by another 2 1 after an additional 30
minutes. This new temperature will be maintained for 7 hours before it
returns .to the originally selected temperature. This ends the Sleep mode
and the unit will continue to operate as originally programmed.
NOTE: This feature is unavailabe under FAN or DRY mode.
3. ELECTRONIC FUNCTION
3.1 Abbreviation
T1: Indoor room temperature.
T2: Temperature of evaporator.
T3: Temperature of condenser.
TS: The setting temperature.
S1: Water level swicth
3.2 Main Protection
3.2.
1 The compressor functions protection with a delay of three minutes.
Compressor will restart with a delay of three minutes once it stops
operation.But it is four minutes delay for Heat pump model’s restarting.
3.2.2
Sensor protection at open or short circuit. A/D
≤
2
Ω
, Sensor protection at open circuit;
A/D
≥
253
Ω
, Sensor protection at short circuit.
(Table A in next page show you the relation between
temperature and resistance of sensor.)
3.2.3
.
At cooling or drying mode,when T2
≤
2
≥
10