COLDWAVE MPPD-12CRN1, Руководство пользователя

Страница: 4 / 21

2. OPERATION MODES AND INSTRUCTIONS
9 8
Optional
7 6 5 4 4 3 2 1
2.1 OPERATION MODES
POWER BUTTON 1
Power switch on/off.
SLEEP/ECO BUTTON
2
Used to initiate the
SLEEP/ECO operation.
NOTE: On some models SLEEP
button is instead of ECO button.
FAN/ION BUTTON (ION
is optional)
3
Control the fan speed. Press to select
the fan speed in four steps-LOW,
MED, HI and AUTO.The fan speed
indicator light illuminates under
different fan settings except AUTO
speed. When select AUTO fan speed,
all the fan indicator lights turn dark.
NOTE: Press this button for 3 seconds to
initiate ION feature.The ion generator is
energized and will help to remove pollen
and impur ities from the air, and trap
them in the filter. Press it for 3 seconds
again to stop the ION feature.
UP(+) AND DOWN(-) BUTTON
4
Used to adjust (increasing/
decreasing) temperature settings
(2 1 increments) in a range of
62 (17 ) to 88 (30 ) or the
TIMER setting in a range of
0~24hrs. NOTE:
The control is capable of displaying
temperature in degrees Fahrenheit
or degrees Celsius. To convert
from one to the other, press and
hold the Up and Down buttons at
the same time, for 3 seconds.
MODE SELECT BUTTON 5
Selects the appropriate operating mode.
Each time you press the button, a mode
is selected in a sequence that goes from
AUTO, COOL, DRY, FAN and HEAT
(cooling only models without).
The mode indicator light illuminates
under the different mode settings..