background image

2

Foreword

Thank you for selecting Coldelite to meet your operation and growing demands.

Your Coldelite freezer has been manufactured utilizing the most advanced technology and
modern equipment available in the industry. We at Coldelite, take great pride and care in
the manufacturing of each and every freezer, using only the finest components available, to
provide you with many years of trouble free operation.

Many years of experience in the manufacturing of soft serve dispensing equipment

have guided us in the preparation of this Operation Manual.

 PLEASE READ IT

CAREFULLY 

and keep it in an available place for future reference and most of all, follow

the instructions carefully.

On the following pages, you will find important information and procedures, which

describe the proper installation, sanitizing, operation, and maintenance of your Coldelite
freezer. We feel certain that your compliance with these instructions will assure excellent
performance, trouble-free operation and profitable business for years to come.

All technical data, pictures and drawings contained in this operation manual are not binding on the manufacturer, nor can the

manufacturer be held liable for any modification to the freezer in part or completely.

Part Number:

Содержание KW-77
















Отзывы: