Cojali Jaltest SST, Руководство пользователя

Страница: 5 / 15

English
5
1.3 EQUIPMENT COMPOSITION
Jaltest SST is made up of an
electronic device with an
operating interface with a button
and LEDs, as well as a complete
kit of cables and multipins that
allow connection in the sensor
and ECU connector pins. It has
a 9 V alkaline battery type 6LR61.
1. On/Off & mode change button
This mode allows the user to
interact with the device (see
details in the Function table on
page 6). There are 3 press types:
• Short press (less than 1 s): It changes mode when no mode is selected. If a mode is
selected, it carries out a specific action of the mode (see Function table on page 6).
• Long press (between 1 s and 3 s): It selects the desired mode . If a mode is already selected,
it returns to start mode .
• Extra-long press (more than 3 s): It turns off the device.
2. Error detection
A red LED lights up if an open circuit, short circuit, or power supply problem is
detected.
3. Sensor type
A green LED indicates whether an active or passive sensor is being read or simulated.
4. Low Battery
A red LED lights up if the battery is too low.
5. Simulation LEDs and signal status
In simulation/read mode, 4 green LEDs flash sequentially clockwise, indicating that
the signal is being simulated/read.
6. Connections
3 banana female connectors. The connection positions; power supply (red), signal
(blue), and ground (black) are indicated in the upper part of the control panel.