COINWASH TD30X30 Скачать руководство пользователя страница 1

Страница: 1 / 106

SERVICE MANUAL

T4300S, TD30x30

487 03 29 81.02

–

Do not store or use gasoline or other flammable

vapors and liquids in the vicinity of this or any
other appliance.

– WHAT TO DO IF YOU SMELL GAS:

• Do not try to light any appliance.

• Do not touch any electrical switch; do not use

any phone in your building.

• Clear the room, building or area of all

occupants.

• Immediately call your gas supplier from a

neighbor’s phone. Follow the gas supplier’s
instructions.

• If you cannot reach your gas supplier, call the

fire department.

– Installation and service must be performed by

a qualified and authorized installer, service
agency or the gas supplier.

WARNING: For your safety the information
in this manual must be followed to minimize
the risk of fire or explosion or to prevent
property damage, personal injury or death.

WARNING

Содержание TD30X30











































































































Результаты поиска

Содержание TD30X30

Отзывы:

Бренды по названию

Популярные бренды

COINWASH TD30X30, Руководство по обслуживанию

Результаты поиска

Содержание TD30X30

Отзывы:

Бренды по названию

Популярные бренды