8
SECTION 2: INSTALLATION & SETUP
Unpacking / Installing the Changer
After removing the coin changer from the
shipping carton, inspect it for possible damage.
If the unit is damaged, notify the shipping
company immediately. The consignee (person
or company receiving the unit) can fi le a claim
against the carrier for shipping damage. We
recommend you keep the original carton and
packaging materials to reuse if you need to
transport or ship the coin changer in the future.
If the coin changer is being stored or used as a
spare, always keep it in its shipping carton when
not in use. This will keep it clean and offer the
best protection for the unit.
Installing the Changer
1.
Remove power from the vending machine.
DO NOT connect the changer harness
to the vending machine with power
connected.
2.
Remove the acceptor from the changer
housing by pressing the acceptor latch
(see Figure 4) on the front of the acceptor
and pull the escrow lever towards you,
away from changer housing.
3.
Disconnect the acceptor’s ribbon cable
from the changer housing (see Figure 5).
Lift the acceptor slightly to free the lower
acceptor studs from the changer housing.
Place the acceptor in a clean, dry area.
4.
Set the three mounting holes in the back
of the changer housing over the mounting
screws in the vending machine (see
Figure 6). Tighten securely by hand.
5.
Re-install the acceptor by inserting the
lower acceptor studs into the changer
housing. Plug the acceptor ribbon
cable into the changer housing. Press the
top of the acceptor into the changer
housing until the acceptor latch engages
the changer housing.
6.
Verify the vendor’s coin return
mechanism is adjusted so that the
Acceptor gate is fully closed. There
should be a small gap between the coin
return mechanism and the changer
escrow
lever.
Figure 4
Escrow Lever
Acceptor
Release
Latch
LCD Display
User
Interface
Keypad
External
Data Port
Graduated
Tube Scales
IRDA Link
Coin
Denomination
Markings
Changer Components
Changer Components
Payout
Cassette
Release Latch
Sorting Door
Latch
Swing-out
Payout
Cassette
Access
Escrow Lever
Acceptor
Release Latch
Acceptor Gate
Sorting Door
Acceptor
Docking
Cradle
Figure 3