8.0 Factory Reset
1. Press and hold the “Reset” button for 10 seconds as illustrated in Figure 7.0.
9.0 Complete the Dome Camera Installation
1. Attach the tether from the dome trim ring to the tether mounting point in the enclosure as shown in Figure
8.1.
2. Rotate the black shroud inside the dome trim ring cover so it aligns with the camera position.
3. Place the supplied desiccant pack inside the dome as shown in Figure 8.2 to prevent fogging due to
moisture that is present when installing the camera. Use the supplied cable tie to keep the desiccant
from falling down into the dome bubble.
4. Attach the dome trim ring cover with shroud to the enclosure by tightening the three tamper-proof screws
with the supplied Torx T-20 security wrench.
Figure 7.0
Figure 8.2
Figure 8.1
6X-1102C
12
