Coherent Solutions MTPmini Скачать руководство пользователя

Страница: 21 / 27

Modular Test Platform

MTPmini

Coherent Solutions

MTPmini

(V1)

Installing the Software

MPORTANT

Make sure the client PC is connected to the same network as the MTPmini and the
MTPmini is also powered on before proceeding with software installation.

9.1

Client System Minimum Requirements



Operating System

Windows 7 or later



Minimum Screen Resolution

800x600



Free Hard Disk Space

1GB



Communication Port

USB 2.0 (Ethernet and USB 2.0 recommended)

9.2

Test Instrument Manager Software Installation

Begin the installation by running the

‘

CSTIMSetup_[version].exe

’

file located on the supplied media. This will

start the installation of the Test Instrument Manager software package.

When the installation begins, you will see the Welcome screen. Click on Next to begin the installation.

Please read the license agreement. If you choose to acce

pt the agreement, click on the “

I accept the terms

of the License Agreement

”

check box and then click "

Install

". If you do not wish to accept the terms of the

agreement, click on "

Cancel

" to terminate the software installation.

Once the license agreement has been accepted the installation will begin and the file progress will be
displayed throughout the installation.

When the installation has completed you can click on "

Finish

" with the check box ticked (by default) to

immediately start the Test Instrument Manager software.

The installer will also place a Test Instrument Manager application shortcut on your desktop.

Refer to the Blades’ manual for

details of the use and functionality of this software.

Содержание MTPmini




























Результаты поиска

Содержание MTPmini

Отзывы:

Похожие инструкции для MTPmini

Бренды по названию

Популярные бренды

Coherent Solutions MTPmini, Руководство пользователя

Результаты поиска

Содержание MTPmini

Отзывы:

Похожие инструкции для MTPmini

Бренды по названию

Популярные бренды