Cognex In-Sight 9902L, Справочное руководство

Страница: 17 / 31

Specifications
The following sections list general specifications for the vision system.
Vision System Specifications
Specifications 9902L
Minimum Firmware
Requirement In-Sight version 5.6.1
Job/Program Memory 7.2GB non-volatile flash memory; unlimited storage via remote network device.
Image Processing
Memory 512MB SDRAM
SD Card Slot 1 Micro SD card slot with an 8GB SD card pre-installed for saving job and image files. The
vision system supports SD cards formatted with a FAT32 file system.
Sensor Type 1-inch CMOS, line sensor
Sensor Properties 7µm x 7µm active area, 7µm x 7µm sq. pixels
Maximum Resolution
(pixels)
1
2048 x 1; 2048 x 16384 (up to 16384 lines for a full resolution image).
1K Resolution (Low Light Mode): 1024 x 1; 1024 x 16384 (up to 16384 lines for a full
resolution image).
Acquisition Line Scan integration.
Bit Depth 256 grey levels (8 bits/pixel)
Lines Per Second
(LPS) 66K LPS
Lens Type C-Mount
Trigger 1 opto-isolated, acquisition trigger input. Remote software commands via Ethernet.
Discrete Inputs 1 general-purpose input when connected to the Breakout cable.
Discrete Outputs 2 high-speed outputs when connected to the Breakout cable.
Encoder Inputs 2 built-in, encoder inputs for use with a 24VDC signal.
Status LEDs SD Card Status, Pass/Fail LED and Indicator Ring, Network LED and Error LED.
Network
Communication 1 Ethernet port, 10/100/1000 BaseT with auto MDIX. IEEE 802.3 TCP/IP Protocol. Supports
DHCP, static and link-local IP address configuration.
1588 Support
Timestamp Resolution: 8ns
Synchronization Accuracy Through Transparent Clock: 5μs
Serial Communication RS-232C when connected to the Breakout cable.
Power Consumption
24VDC ±10%, 1.5A maximum
Material Die-cast and extruded aluminum housing.
Finish Painted.
Mounting Four M4 threaded mounting holes on front and back of the vision system.
1
The default resolution is 2048 x 4096. The width and maximum image height can be adjusted in the Line Scan Settings dialog within In-Sight
Explorer. If the 1K Resolution (Low Light Mode) checkbox is selected, the width is decreased to 1024, providing increased light sensitivity.
Within the AcquireImage function, the Number of Lines parameter value can range from 1 to the Max Image Height.
17
Specifications