![Cognex In-Sight 9902L Скачать руководство пользователя страница 12](http://html1.mh-extra.com/html/cognex/in-sight-9902l/in-sight-9902l_reference-manual_2634792012.webp)
Installation
This section describes the connection of the vision system to its standard components and accessories. For a complete
list of options and accessories, contact your Cognex sales representative.
Note
: Cables are sold separately.
CAUTION
:
All cable connectors are “keyed” to fit the connectors on the vision system; do not force the connections
or damage may occur.
Install the C-Mount Lens and Cover (COV-7000-CMNT-LG)
Complete the following steps to install a C-Mount lens and cover to the vision system. The C-Mount cover (COV-7000-
CMNT-LG) is an optional accessory and required for IP67 protection.
Note
:
l
A C-Mount lens has the following restrictions:
l
Maximum thread length is 5.25mm.
l
The C-Mount lens threads and body cannot protrude more than 6.5mm in length into the vision
system when screwed in, unless the diameter of the back lens is smaller than 19.25mm. If the C-
Mount lens threads and body protrude more than 6.5mm, you can add a spacer between the lens
and vision system. However, the spacer decreases the working distance.
l
If using the COV-7000-CMNT-LG cover, the maximum lens length is 77mm with a bandpass filter, the
maximum lens body diameter is 55mm and the maximum diameter including locking screws is 55mm.
1. Remove the rubber faceplate covering the image sensor window, if present.
2. Remove the protective film covering the threaded lens opening, if present.
3. Place the adapter on the faceplate of the vision system. Insert the four adapter screws and tighten; the maximum
torque is 0.90 Nm (8 in-lb).
4. Thread the lens into the vision system.
5. (Optional) For longer lenses, the C-Mount cover extender accessory (COV-7000-CMNT-LGX) can be used to add
30mm in length to the C-Mount cover. If using the cover extender, attach it to the vision system and rotate the
cover extender clockwise approximately thirteen degrees to lock it.
6. Attach the cover to the vision system. Rotate the cover clockwise approximately thirteen degrees to lock it.
12
Installation
Содержание In-Sight 9902L
Страница 1: ...In Sight 9902L Vision System Reference Guide 2018July19 Revision 5 6 1 39 ...
Страница 31: ......