Cognex In-Sight 1400, Инструкция по установке и справочник

Страница: 31 / 58

In-Sight® 1400 I/O Expansion Module Installation and Reference Manual
17
3.2.4 High Speed Outputs
The 1400 I/O Expansion Module provides two high-speed discrete outputs (HS OUT 0,
HS OUT 1) that can be used to trigger remote events. High-speed output signals travel
through the I/O module without processing.
High speed outputs are not optically isolated and are typically connected (directly or
indirectly) to a load (such as a relay, indicator light or a motor). Use the general purpose
outputs if you want to isolate your output device.
High Speed Output - Wiring Example
Figure 3-4: High Speed Output To Strobe Controller - (Sink Only)
Notes:
• High speed outputs can only be connected so that the 1400 I/O Module sinks current.
• Do not connect a high speed output to OUT COMMON. You must use -24VDC as a
return path. See Figure 3-4 .
Table 3-5: Output Specifications
Specification Description
Voltage 28V (24V nominal)
Current 200 mA (max)
9'&32:(56833/<
IRU,Q6LJKWVHQVRURQO\
9
9&20021
6752%(&21752//(5
P$PD[
5HVLVWRUPD\EHUHTXLUHGWR
UHGXFHYROWDJHWRPHHWVWUREH
FRQWUROOHUHOHFWULFDOUHTXLUHPHQWV