6. Connect all blue wires together
7. Connect brown wires from IVSL-FSK-J5000 together
l
Cut off brown wire from CCB-M12XFLY-05
8. Connect blue wires to GND
9. Connect brown wires to 24 VDC
Note
: For more details on the External Light Control, see
External Light Control (CCB-M12XFLY-05)
Mounting the Reader
The reader provides mounting holes for attachment to a mounting surface.
The accessory mounting bracket kit (DMBK-370-MNT) includes the mounting bracket, four Phillips flat head M3 DIN 965
screws for attaching the reader to the mounting bracket and four M6 DIN 912 (ISO 4762) screws for securing the bracket
to a mounting surface.
CAUTION
:
Make sure that the reader is grounded, either by mounting the reader to a fixture that is electrically
grounded or by attaching a wire from the reader’s mounting fixture to frame ground or Earth ground. If using a
ground wire, attach it to one of the four mounting points on the back plate of the reader; not to the mounting points
on the front of the reader.
1. Align the holes on the mounting surface with the mounting holes on the reader.
2. Insert the M3x5, DIN 965 (4x) screws into the mounting holes.
Note
: Use a 2.5 mm hex wrench to torque the captive screws to 0.60 Nm (5 in-lb). Tighten in sequence.
40
Setting Up Your DataMan 370 Reader
