M3 x 6.35 mm captive screws
Note
: Use a 2 mm hex wrench to torque the captive screws to 0.34 Nm (3 in-lb). Tighten in sequence.
6. Attach the front cover.
M3 x 12 mm captive screws
Note
: Use a Phillips Screwdriver (PH0) to torque the captive screws to 0.31 Nm (2.75 in-lb). Tighten in
sequence.
Note
: Remove the adhesive protective film from the front cover after Step 6.
32
Setting Up Your DataMan 370 Reader
