Cognex DataMAN 260 Q Скачать руководство пользователя страница 6

Страница: 6 / 50

Getting Started

This section provides general information about the DataMan 260 series readers as well as about the DataMan 260

accessories and systems.

About DataMan 260

The DataMan 260 readers are best in class ID readers, offering superior performance with the latest ID tools, flexibility to

configure the reader in terms of lighting and optics to optimize the application, and an ease-of-use giving the user the

ability to setup and deploy an application quickly and efficiently all without the need for PC:

Superior performance, 1-D and 2-D code reading, including HotBars2™ and patent-pending PowerGrid™

Flexible optics/lighting, including field upgrades, allowing for the protection of your investment

Ease-of-use, including an auto-tune and trigger button on the reader, the ability to configure the reader in a

straight or right-angle orientation and auto-focus capability utilizing a liquid lens

The DataMan 260 readers provide support for Ethernetand RS-232 communications.

Key highlights:

1DMax with HotBars2™, best in class 1-D reading, 2DMax with PowerGrid™, best in class 2-D reading. Reading

codes no other ID reader on the market can.

Multiple options for LED lighting, along with optical filters and polarizing filters. Options for different powered lens,

with autofocus capabilities for each.

Configuration

This document provides basic information about how to configure and use DataMan 260 readers. Additional information

is available through the Windows

Start

menu or the DataMan Setup Tool

Help

menu after you install the DataMan

software on your PC:

The

DataMan Communications and Programming Guide

shows you how to integrate your DataMan reader into

your particular automation and factory environment.

Cognex->DataMan Software v x.x.x->Documentation->Communications->DataMan Communications and

Programming Guide

The

DataMan Industrial Protocols Manual

provides information on how to integrate DataMan readers into your

particular environment using industrial protocols.

Cognex->DataMan Software v x.x.x->Documentation->Communications->DataMan Industrial Protocols Manual

The

DataMan Reader Configuration Codes

document provides printable 2-D codes that you can use to

configure the DataMan reader.

Cognex->DataMan Software v x.x.x->Documentation->English->Reader Configuration Codes

Getting Started

Содержание DataMAN 260 Q


















































Результаты поиска

Содержание DataMAN 260 Q

Отзывы:

Похожие инструкции для DataMAN 260 Q

Бренды по названию

Популярные бренды

Cognex DataMAN 260 Q, Справочное руководство

Результаты поиска

Содержание DataMAN 260 Q

Отзывы:

Похожие инструкции для DataMAN 260 Q

Бренды по названию

Популярные бренды