Cognex DataMAN 260 Q Скачать руководство пользователя страница 43

Страница: 43 / 50

3. Remount the front cover. Observing the tightening sequence below, tighten all four screws to 9 Ncm using a

torque wrench.

Note

: If you use an optical filter and the illumination was removed, remount the illumination module first and

then remount the front cover.

Note

: The rib in the front cover must be oriented to the top side.

Tuning

By tuning, your DataMan 260 reader automatically selects the best settings for the given reading situation, based on

parameters of illumination, camera and decoder properties, and focal distance. Tuning autodiscriminates all enabled

symbologies (both 1-D and 2-D). If multiple symbols are found in the field of view, tuning locks on the first one found. Use

this feature to create an optimum setting to read your codes.

You can use any of the following methods to tune your reader:

Press the Tune button at least for 3 seconds on your reader. The first press starts the tuning and the second press

cancels the tuning, if it is still ongoing.

Turn on tuning in DataMan Setup Tool.

Start tuning by sending a DMCC. For more information, see the

Command Reference

, available through the

Windows

Start

menu or the DataManSetup Tool

Help

menu.

Use Input line 1 for tuning. Go to the

System Settings

pane in the DataMan Setup Tool and check

Tune

. You can

also use the

In1

button on the toolbar.

Note

: Tune button can toggle the aimer light ON and OFF.

External Triggering and Trigger Modes

If you are using external triggering, you can use any of the following methods to trigger your DataMan 260 reader:

1. Press the Trigger button on the reader.

2. Send a pulse on the I/O cable: T (orange or red), Trigger - (black).

3. Send a serial trigger command over the RS-232 or the Ethernet connection.

4. Click the Trigger button or press

<Ctrl>-T

in DataMan Setup Tool.

DataMan 260 supports a variety of trigger modes:

Using Your DataMan 260

Содержание DataMAN 260 Q


















































Результаты поиска

Содержание DataMAN 260 Q

Отзывы:

Похожие инструкции для DataMAN 260 Q

Бренды по названию

Популярные бренды

Cognex DataMAN 260 Q, Справочное руководство

Результаты поиска

Содержание DataMAN 260 Q

Отзывы:

Похожие инструкции для DataMAN 260 Q

Бренды по названию

Популярные бренды