4.2. Safety chain
When hanging the
Strip Lite Led RGB
we recommend the use of a safety chain
“D”
affixed to the yoke and to the suspension device. The safety
chain should be either a metal wire rope or a metal chain, both suitably rated for the purpose.
4.3. Adjusting beam direction
If the
Strip Lite Led RGB
is floor mounted, it can be tilted to adjust the beam output. To perform this adjustment, follow the instruc-
tions set out below.
1.
Loosen the handles
“E”
located on the side of the projector, thus allowing the inclination to be changed.
2.
Adjust the projector’s tilt.
3.
Refasten the handles
“E”
on the side of the projector.
90
°
90
°
8
English
