13.2. Periodic maintenance
Mechanicals
Check that the units is not mechanically damaged. Regularly clean the glass by using a soft cloth with a specific cleaning liquid and, if
necessary, replace the damaged parts.
Electrical components
Check all electrical components for correct earthing, oxidation and proper attachment of all connectors, cleaning and refastening if nec-
essary.
All the components of the
Strip Lite Led RGB
are available as spare parts from your
Coemar service centre
.
Accurate description of the fixture, model number, and type will assist us in providing for your requirements in an efficient and effective
manner.
The diagram below indicates some possible problems and solutions if they should occur.
Problem
Possible solution
Strip Lite Led RGB
won’t turn on.
Mains power is not available to the
Strip Lite Led RGB
:
- Check that the green Led is on, if so check the incoming voltage to the
Strip Lite Led RGB.
- Check the main pcb fuse
and that of the switching powersupply.
Strip Lite Led RGB
doesn’t respond to DMX signal
Incoming DMX may not be being received by the
Strip Lite Led
RGB
:
- check that the led indicating DMX input is flashing. If not, check the
DMX console’s output and any cabling for continuity
.
- Check the dip-switch panel to ensure that no functions are selected
which inhibit
DMX control.
- Strip Lite Led RGB
may be incorrectly addressed. Check the DMX
addressing.
The
Strip Lite Led RGB
is set to auto but is not running
any programs
In addtion to setting the AUTO dip-switch to on, it is necessary to also
select
a program number
(see section
9. AUTO function
).
- Multiple programs have been selected - only one program at a time
may be selected.
- Check that amongst the interconnected fixtures, only one has bee set
to Master.
- Ensure that there is no incoming
DMX
signal (this may cause a con-
flict in signals).
15. Frequently asked questions
14. Spare parts
23
English
