English
15
8. Display panel functions
By suitably using all the functions of
Stage Lite Led sc
, which
can be activated through its display panel, it is possible to change
some of the parameters and to add some functions.
Changing the preset settings made by
Coemar
can vary the functions of the projector so that it will respond differently to the
controller; therefore carefully read about the functions described here before carrying out any possible selection
.
.
8.1 Quick guide to menu
In order to access the functions, just press the menu button: one after the other, all the voices of the menu will be cyclically shown
each time the key + or – will be pressed. To select the desired function, press
enter
.
8.2 Rapid count
By the display panel of
Stage Lite Led sc
It is possible to quickly change the various numbers displayed for the different functions
in the following 3 manners:
1.Pressing the + or – buttons will cause the count to be quicker.
2.Pressing first + and then – and then holding them down simultaneously will cause the numbers to jump to the highest value.
3.Pressing first – and then + and then holding them down simultaneously will cause the numbers to jump to the lowest value.
8.3 MODE menu
The projector gives the opportunity to change and customize some functional settings.
DMX mode setting
MASTER mode setting
SLAVE mode setting
It let select the program to perform.
Duration of the sequence in seconds
Time interval of the sequenze in seconds
