The iSPOT 575 MB
utilises a Philips 575 MSD or Philips 575 MSR/2 575W lamp with a GX 9.5 lampbase.
The lamp is available from your
coemar
service centre:
The fixture’s internal temperature can reach 250° C after 5 minutes with a maximum peak of 350° C; ensure that the lamp is cold
prior to attempting removal. The fixture should be allowed to stand and cool for 10 minutes prior to its removal.
Both MSR and MSD lamps are part of the mercury vapour family of discharge lamps and must be handled with great care. The lamps
operate at high pressure, and the slight risk of explosion exists if operated over their recommended lamp life.
We recommend, therefore, that the lamp be replaced within the manufacturer’s specified lamp life.
installing the lamp
1) Using a Philips head screwdriver, loosen the 2 screws (A) which affix the lamp assembly, located at the rear of the projector.
2) Remove the lamp assembly (
B
).
3) Locate the lampholder (
C
)
Attention
Disconnect mains prior to opening up the unit.
Philips 575 MSD
coemar cod.
105215
power
575 w
luminous flux
43.000 lm
colour temperature
6000° K
base
GX 9,5
approximate lamp life
3000 hours
Philips 575 MSR/2
coemar cod.
105245/2
power
575 w
luminous flux
49.000 lm
colour temperature
7.200° K
base
GX 9,5
approximate lamp life
1000 hours
4. Lamp: Installation and replacement
6
English
