4) Insert the lamp.
The lamp is manufactured from quartz glass and should be handled with care; always adhere to the instructions supplied in the lam-
p’s packaging. Never touch the glass directly, use the tissue provided in the lamp’s packaging. The GX 9.5 lampholder is symmetrical
in construction. DO NOT USE UNDUE FORCE. In case of difficulty, inspect for physical damage and then repeat the installation pro-
cedure.
5) Replace the lamp assembly into its original position and refasten the 2 screws (A) which were previously loosened.
Attention: we recommend that you realign the lamp in the optical system of the projector to optimise the output and to avoid dama-
ge to gobos and dichroics. Refer to section 13 for a description of this procedure.
The projector is able to operate at either 100, 115, 208, 230 or 240 V.
Coemar
presets (barring specific requests) an operating voltage of
240v at a frequency of 50 Hz.
The operating voltage and frequency are noted on a sticker nearby the voltage selector on the base of the unit.
iSPOT 575 MB
can operate at either 50 or 60 Hz with no need for any adjustments.
altering the operating voltage
If the preset voltage does not correspond with the conditions in your particular country of operation, follow the instructions in the
appropriate section of this manual, section
15. Altering the operating voltage.
Incorrect voltage selection will detrimentally affect the operation of the projector and will immediately void
the warranty.
factory set
main at:
100V
115V
208V
230V
240V
50Hz
60Hz
5. Operating voltage and frequency
7
English
