Coemar ISPOT 1200 EB, Инструкция по эксплуатации, Страница: 6 / 29

ISPOT 1200 EB utilises a Philips MSI 1200w/s or Osram HMI 1200W/s lamp rated at 1200W with a SFc10-4 lampbase.
The lamp is available from your authorised coemar sales agent:
The fixture’s internal temperature can reach 250° C after 5 minutes, with a maximum peak of 350° C; ensure that the lamp is cold
prior to attempting removal. The fixture should be allowed to stand and cool for 10 minutes prior to its removal. The lamps are part
of the mercury vapour family of discharge lamps and must be handled with great care. The lamp operates at high pressure, and the
slight risk of explosion of the lamp exists if operated over their recommended lives. We recommend, therefore, that the lamp be
replaced within the manufacturer’s specified lamp life.
installing the lamp
!) Remove the 4 screws at the rear of the projector body, as shown in the diagram below.
Fig.1
2) Remove the lampholder assembly.
Fig.2
3) Insert the lamp, taking care not to come into contact with the lamp’s quartz glass surface.
Fig.3
Attention
Turn off mains power prior to opening up the unit
Philips MSI 1200W/S
coemar cod. 105099/2
base SFc10-4
power 1200 w
luminous flux lm 110.000
colour temperature Tc 6000°K
approximate lamp life 750 hr
Osram HMI 1200W/S
coemar cod. 105099/1
base SFc10-4
power 1200 w
luminous flux lm 110.000
colour temperature Tc 6000°K
approximate lamp life 750 hr
4. Lamp: installation and replacement
6