This function may be useful should you need to power up the
ISPOT 1200 EB
inside its roadcase or for any other reason where
you may wish to power up the unit without it moving.
1) Power up the projector whilst simultaneously pressing the
enter
,
menu
and
–
buttons.
the projector will perform the usual reset functions on every motor barring the pan and tilt motor, which will remain static throu-
ghout the reset procedure..
2) You may at this point alter a DMX address, or any other menu-based parameter without projector articulated movement.
3) To resume normal
ISPOT 575 EB
functioning, you must turn the projector of and on again via the
power
button.
The electronic counter should be reset to zero hours every time the lamp is changed in order to provide accurate information about
lamp life. Power up the
ISPOT 1200 EB
whilst simultaneously holding the
+
and
–
buttons, the fixture will start up with the coun-
ter reset.
The projector will have effected a reset of the
LIFE
counter
To verify that the counter reset has been undertaken:
1) Press the
menu
button, the projector will show
MODE
2) Press the
+
or
-
button until
MEAS
is displayed
3) Press the
enter
button
4) Press the
+
or
-
button until
HOUR
(for hour) is displayed.
5) Press the
enter
button
6) Press the
+
or
-
button until
LIFE
(lamp life) is displayed.
7) Press the
enter
button; the display will show
0000
confirming that the counter has been reset.
N.B. You may also verify that the other counters
LIFS
(cumulative lamp life for all lamps installed) and
UNIT
(number of hours of
fixture operation) have remained unaltered.
An internal 4 point encoder system allows the
iSpot 575 EB
to return to its correct position in case the unit is accidentally knoc-
ked out of alignment whilst operating. This is particularly useful if the projector is to be mounted on the floor in a position where
the performer or artist may accidentally bump the unit.
NOTE:
this function is able to be disabled (Display panel functions
OPTO OFF
).
O N
sensori attivi
O F F
sensori scollegati
☞
enter
☞
+
o
–
☞
+
o
–
☞
enter
☞
enter
AOO1
FUNC
☞
+
o
–
O P T O
disattiva il ritorno in posizione automatico
Il proiettore ritorna in posizione se toccato accidentalmente,
oppure la funzione viene disabilitata. Il proiettore esegue un
reset meccanico (opto OFF).
☞
enter
☞
menu
15. Automatic realignment
menu
enter
+
I tasti (+) e (--) variano l'indirizzo DMX, (enter) registra. Per selezionare una
funzione premere (menu). (menu) 2 volte, riporta il display a default.
To change DMX address use (+) and (-); to record press (enter).
To select a function press (menu). To escape a function press (menu) twice.
A00 I
14.
Resetting the counter
menu
enter
+
I tasti (+) e (--) variano l'indirizzo DMX, (enter) registra. Per selezionare una
funzione premere (menu). (menu) 2 volte, riporta il display a default.
To change DMX address use (+) and (-); to record press (enter).
To select a function press (menu). To escape a function press (menu) twice.
I I I I
13.
Turning on the ISPOT 1200 EB without articulated movement
16
Содержание ISPOT 1200 EB
Страница 2: ......
