Coemar ISPOT 1200 EB, Инструкция по эксплуатации

Страница: 22 / 29

ISPOT 1200 EB utilises a mechanical system which allows the fixture’s gobos to be removed without the need for specialised equip-
ment.
Replacement gobos should be made of either heat resistant glass or metal.
An ever-increasing range of gobos is available from your
coemar sales network.
replacing gobos
gobo dimensions are as follows:
gobo wheel 1 (closest to the lamp):
ø external = 32,9 mm
ø image = 26 mm
thickness = from 0,2 to 3,5 mm
gobo wheel 2:
ø external = 32,9 mm
ø image with defined borders = 28 mm
ø image with non-defined borders = 30 mm
thickness = from 0,2 to 3,5 mm
Gobos should be replaced only when the projector is unpowered.
1- Open the projector housing as described in the preceding section.
2- Loosen the thumbscrews
A , B
,
C and D
as shown in this diagram
3) At this point, remove the gobo group as shown in the diagram. You will the gobo wheels in a position where access to the indi-
vidual gobos is quite straightforward.
Proceed with the changing of the individual gobos as required.
19. Interchanging gobos
22