A- Display area
B- Power and signal connection
C- Sensor test PCB connection
A-
Display area
This is the section of the device where control of compatible projectors connected to the DR1 is effected. The replicated menu of
each projector appears in this display and may be navigated via the
remote
,
enter
,
+
and
--
buttons.
The
DMX led indicates correct signal reception of
DMX 512 from the controller used to operate the projector.
The
DR1
led indicates correct dialog between the DR 1 and the projector.
Power and signal connection
At one end of the
DR1 you will find a power switch and DMX IN
and
DMX OUT sockets which utilise 5 pin
XLR
connectors, as well as a socket for connection of the power supply provided with the unit in its packaging.
Sensor test PCB connection
Also located on the
DR1 is a
20 pin socket for the connection of the S
ensor test
PCB.
presa a 20 pin per PCB sensor test
PCB sensor test 20 pin port
to external “PCB sensor test”
serial number
DMX out
+9 +30 V DC 150 mA
DMX out
DMX in
interruttore
on/off switch
alimentazione
mains connection
DMX led
tasti di
navigazione
control keys
remote
menu
enter
+
--
DMX in
DR1
DR1 led
Display
3. Section descriptions
22
English
Содержание DR1
Страница 2: ...2 ...
