24
INSTALLER INSTRUCTIONS ONLY
The display panel at the rear of the
CF 7 W
ash
Z
oom
X
allows for the electronic alignment of the projector’s motors. This
procedure is performed by
coemar
at the factory. It may be useful to perform this procedure in the case of internal compo-
nents being replaced.
Altering the factory settings may radically alter the functioning of the projector. Carefully read all of the following prior to
attempting any changes.
electronic calibration
Important Note
: electronic calibration is only possible if the projector is connected to a
DMX 512
source.
1) Press the menu button.
2) Press the + or - button until the display shows
RESE
(for reset).
3) Press the enter button to confirm your selection then immediately and simultaneously press and hold the
menu button
,
holding both pressed for at least
30
seconds. The motors of the unit will perform a reset and the display will show
–-
–- –- –-
for some few seconds, indicating that you have entered the electronic calibration mode.
Note
: Simultaneously pressing the
+
and
-
buttons will return the calibration value to the default value of 128.
PNAL
pan alignment
Pan movement alignment
T L A L
tilt alignment
Tilt movement alignment
SHAL
shutter alignment
Shutter alignment
CYAL
cyan alignment
Cyan colour alignment
MAAL
magenta alignment
Magenta colour alignment
YEAL
yellow alignment
Yellow colour alignment
FRAL
fresnel lens alignment
fresnel lens alignment
LEAL
parabolic lens alignment
parabolic lens alignment
COAL
colour wheel alignment
Alignment of colour wheel
DIAL
dimmer alignment
Alignment of dimmer
END
end
To end the motors' electronic alignment
procedure and confirm it.
☞
+
o
–
☞
+
o
–
☞
enter
0128
☞
enter
☞
+
o
–
es.
0 1 2 0
☞
enter
0128
☞
enter
☞
+
o
–
es.
0 1 4 0
☞
+
o
–
☞
+
o
–
☞
+
o
–
☞
enter
0128
☞
enter
☞
+
o
–
es.
0 1 2 0
☞
enter
0128
☞
enter
☞
+
o
–
es.
0 1 2 0
☞
+
o
–
☞
enter
0128
☞
enter
☞
+
o
–
es.
0 1 3 0
☞
+
o
–
☞
enter
0128
☞
enter
☞
+
o
–
es.
0 1 2 5
☞
+
o
–
☞
enter
0128
☞
enter
☞
+
o
–
es.
0 1 3 5
☞
+
o
–
☞
enter
0128
☞
enter
☞
+
o
–
es.
☞
+
o
–
☞
enter
0 1 2 7
☞
+
o
–
☞
enter
A001
0 1 3 2
☞
enter
☞
enter
es.
0128
☞
+
o
–
19. Electronic motor alignment
English
