12
After having followed the preceding steps, turn on the DMX 512 controller which will be used to control the
CF 7 W
ash
Z
oom
X
.
Following this, turn on the power to the projector, and turn on the projector’s power switch.The projector will
perform a reset function on all the internal and external motors. This will last some few seconds, aftr which it will be subject
to the external signal from the controller.
DMX led
The DMX
led
will be static on to indicate that
DMX 512
signal is being correctly received by the projector.
If the led is off, the projector is not receiving signal. check the cabling and the functioning of the controller.
function display
DMX
menu enter
+
power
9. Powering up
English
