16. Interchanging
You may replace dichroic glass filters on the colour wheel with colours of your own
dichroic filters
choosing. These replacements should have a 45mm Ø, with a 1 mm thickness and be
of tempax (high temperature resistant) glass.
Ensure that prior to commencing any replacement operation, the projector is discon-
nected from mains power.
replacing a dichroic filter
1) Remove the inspection lid of the projector as described in section
14. Opening
the projector housing
2) Locate the dichroic colour wheel
3) Manually rotate the colour wheel until you locate the colour you wish to replace.
4) Rotate the colour wheel until you reach the empty slot.
5) Remove the dichroic filter by sliding the filter gently up and towards the central
retaining clips, thus releasing it from the two clips on the outer edge of the
wheel.
Attention
Disconnect mains power prior to attempting any replacement procedure.
