Codume X-Vent II 300, Руководство по эксплуатации

Страница: 10 / 28

CODUME Page 10
11 Make final adjustments to the
unit to unable it to be pushed
far enough over the hooks
that it cannot fall back out
again.
In the picture on the right, the
unit is hanging from the two
guide hooks.
At the bottom of the picture
one of the adjustment screws
shows.
12 Now, fasten the unit to the
wall frame, using the two
factory-supplied M8 bolts,
one on each side.
To get the unit to hang
properly relative to the wall,
adjust it by screwing the two
adjustment screws situated
just over the base plate.
Use a no. 13 screw wrench.
13 The unit must hang
horizontally; therefore, it is
important to check and
readjust.