242
Gateway and Gateway 4 Manual v1.2
© Tieline Research Pty. Ltd. 2021
3. Select
Fuse-IP
and press the
button.
Important Note:
Ensure Fuse-IP is disabled prior to configuration. Navigate to
Fuse-IP
Status
and disable Fuse-IP if it is enabled.
4. Navigate down to
Mode
and press the
button to select
Server
if the codec is at the
studio.
Note: the server codec serial number will be displayed and needs to be entered into the Fuse-IP
client codec.
5. Navigate to
Bonded Interfaces
and press the
button, then navigate to each interface in
turn and press the
button to select or deselect interfaces. Confirm the changes when
exiting the menu.
6. Leave the default Fuse-IP
Port
as
8999
in most situations unless this port is already in use,
e.g. there are multiple codecs behind a firewall using Fuse-IP, therefore it is necessary to
allocate a different port for each Fuse-IP tunnel. Note: the port number on the client and
server codecs must be the same.
Содержание Tieline Gateway
Страница 33: ...33 Tieline Research Pty Ltd 2021 Gateway and Gateway 4 Manual v1 2 Home Screen Menus...
Страница 34: ...34 Gateway and Gateway 4 Manual v1 2 Tieline Research Pty Ltd 2021 Settings Menu Navigation...
Страница 183: ...183 Tieline Research Pty Ltd 2021 Gateway and Gateway 4 Manual v1 2...
Страница 283: ...283 Tieline Research Pty Ltd 2021 Gateway and Gateway 4 Manual v1 2...
