19
D027173_07 CR821X Dual Board Decoded Scan Engine Integration Guide
Our ribbon cables have the following characteristics:
1:
Bottom contact on mating end
2:
12 pin
3:
0.5 mm pitch
4:
0.3 mm thickness with stiffener
Our ribbon cables have contacts on the same side of each end. Please
take this into account with respect to the control signals when designing
the mating connector pinout on the host interface.
The Development Kits, CR821x-DKX, use a ribbon cable with opposite
side contacts.
3.3V operation is only possible with 152.4 mm [6.0”] or shorter ribbon
cable.
Three ribbon cables are available with the following SKUs and lengths:
4.12 – Ribbon Cable Diagram (Decode Board to Host Interface)
SKU
Length
C800
50.8 mm [2.0”]
C801
152.4 mm [6.0”]
C802
304.8 mm [12.0”]
.305
[.012]
CABLE LENGTH
6.00
[.236]
3.556
[.14]
.50
[.020]
.356
[.014]
6.50
[.256]
5.50
[.217]
.28
[.011]
UNITS = MM [INCHES]
