Code CR821 Series, Руководство по интеграции

Страница: 7 / 35

7
D027173_07 CR821X Dual Board Decoded Scan Engine Integration Guide
2.5 – Imager with Mounting Tab Mechanical Specifications
1. In addition to the four blind holes (two
on top and two on bottom) available
for mounting with self-tapping screws,
the Imager with mounting tabs has two
2.50mm [.098”] clearance holes.
2. Please use #1-32 Trilobular ® thread forming
screw or M1.8 Delta PT ® thread forming
screw, with the following dimensions:
Minimum Maximum
Thread Engagement 2.00 mm [.079”] 2.50 mm [.098”]
Length (B)
Mounting Substrate
Thickness (A) + 2.00 mm Mounting Substrate
Thickness (A) + 2.50 mm
Torque N/A 1.5 Ibf-in
UNITS = MM [INCHES]
*Dimension will change based on focus.
Decrease for far focus; increase for near focus.
PIN 1
FRONT VIEW SIDE VIEW
TOP VIEW
BACK VIEW
4X Φ 1.65 [.065]
3.00 [.118]
2X Φ 2.50 [.098]
1.00
[.039]
4.99
[.196]
11.90
[.469]
3.50
[.138]
3.00
[.118]
A
B
1.65
[.065]
2.00
[.079]
#1-32 OR
M1.8 SCREW
MOUNTING
SUBSTRATE
CR8200
HOUSING
26.00
[1.024]
13.00
[.512]
13.63 *
[.537]
31.60
[1.244]
A
PIN 1
FRONT VIEW SIDE VIEW
TOP VIEW
BACK VIEW
MOLEX CONNECTOR
P/N: 51338-0374
2.50 [.098] MAX
2.00 [.079] MIN