7
C005383_10 CR80XX Integration Guide
2.6 – Scan Engine with Mounting Tabs Mechanical Specifications
2.7 – Decode PCB Mechanical Specifications
1. The CR8000 with Mounting Tabs has two
tabs with mounting holes as well as two
blind holes available for mounting with 2
self-tapping screws.
2. For the Mounting Tabs, please use M2.2
x 6 Phillips pan head screws. The design
does not require a washer, however, if one
is desired, Code recommends a flat washer,
No. 2 Screw Size, .19" OD,
.01"-.03" thick.
3. For the Blind Holes, please use M2.2 x 4.5
Phillips pan head, type AB, steel, zinc clear,
Trivalent self-tapping screws.
1. The CR8000 Decode PCB has two holes available for mounting.
2. Please use M2.2 Phillips pan head screws with flat nylon washers, No.
2 Screw Size, 0.19" OD, 0.02" thick.
CR8011 and CR8012
13.53
[.532]
SIDE VIEW
MFG#: CR8##_XXX
E0000000
BOTTOM VIEW
26.00
[1.024]
BACK VIEW
HIROSE CONNECTOR
P/N: DF40C-30DS-0.4V(51)
PIN 2
PIN 30
PIN 29
20.58
[.810]
10.29
[.405]
2.45
[.096]
7.15
[.281]
4.75
[.187]
CL OF OPTICAL PATH
CL OF OPTICAL PATH
FRONT VIEW
TOP VIEW
Ø1.65 [.065] X 3.00 [.128] 2 PLACES
HOLES ARE PROVIDED FOR MOUNTING
WITH SELF-TAPPING SCREWS.
CLEARANCE HOLE FOR
#2 OR M2 SCREW (2 PLACES)
26.00
[1.024]
9.16
[.361]
13.00
[.512]
13.53
[.532]
2.04
[.080]
7.12
[.280]
1.00
[.039]
UNITS = MM [INCHES]
39.00
[1.535]
HIROSE DF40C-10DS-0.4V(51)
PIN 1
TP28
TP29
PIN 1
PIN 10
PIN 30
HIROSE CONNECTOR
P/N: DF40C-30DS-0.4V(51)
PIN 12
PIN 1
CONNECTOR FPC ZIF
P/N: FCI 10051922-1210ELF
TOP VIEW
25.00
[.984]
7.30
[.287]
SIDE VIEW
34.50
[1.358]
22.75
[.896]
2.54 [.100] CLEARANCE HOLE
2 PLACES
2.25
[.089]
BOTTOM VIEW
UNITS = MM [INCHES]
