D018433_01_CR4405_User_Manual
3.1 - Docking the Sled in the Charging Station
2
1. Plug the barrel side of the AC adapter or USB charge cable into the power jack of the charging station (Figure 4).
2. Plug the AC adapter into the wall outlet (Figure 5) or USB cable into a computer’s USB port (Figure 6).
Figure 5
Figure 6
Figure 4
3. Insert the sled (with battery installed) in the larger front bay (Figure 7).
4. Two banks each consisting of four charge status LED indicators are located on the front of the Charging Station. All four LEDs
of LED Bank 1 will rapidly flash indicating readiness to charge, and will then display the sled’s battery status as shown below in
Figure 8.
5. During charging, the LED located at the top right corner of the sled (Figure 9) will also light up according to Figure 10.
Sled Battery Status
LED Display On Charging Station
91 – 100%
61 – 90%
31 – 60%
0 – 30%
Figure 7
Figure 8
Sled Battery Status While Charging
Sled LED Behavior
96 – 100%
Solid green
31 – 95%
Flashes green
11 – 30%
Flashes yellow
0 – 10%
Flashes red
Figure 10
Figure 9
