Code Alarm PowerCode PC 7300, Руководство пользователя

Страница: 6 / 11

6 Using Your Remote Starter
(cont’d)
Using the “Quick-stop” Feature
If you want to make a short stop and leave your vehicle running
(to keep the interior warm or cool, for instance), the quick stop
feature allows you to do this while keeping your vehicle secure and
your keys with you.
To engage quick stop:
1. Stop the vehicle and place the transmission in PARK.
2. With your foot off the brake pedal, press LIGHTS, then START within
3 seconds on the remote control. The parking lights will turn on,
indicating that the vehicle is now running via remote start.
3. Remove the keys from the ignition and exit the vehicle.
Note: Do not leave children or animals unattended in the vehicle
when using the quick stop feature.
System Maintenance
Changing the Remote Control Battery
The two 3-v lithium batteries (CR2016) supplied in your remote
control should last approximately one year, depending on usage.
When the battery begins to weaken, you will notice a decrease in
range, or the distance from your vehicle that your remote transmitter
will operate. Follow the instructions below to change the remote
transmitter battery.
1. Insert the edge of a coin into the slot at the side of the remote
control. Twist the coin to pry the remote control halves apart.
2. Remove the old batteries and replace with new ones.
Be sure to observe the (+) and (-) signs in the battery
compartment.
3. Carefully snap the case halves back together, then test the
remote control.