7
Adding Remote Controls to Your System
The Power Code PC 7300
TM
has the ability to operate from up to four
(4) remote controls. Follow these instructions to add a remote control
to your system.
1. Make sure the system is disarmed and the ignition is off.
2. Open the driver’s door.
3. Turn vehicle ignition on.
4. Press and hold emergency override button.
After 15 seconds, the horn will sound three (3) times. This
indicates that the unit has entered the remote control
programming mode.
5. Release the button.
6. Press the START button (button 1) on the remote control to be
programmed.
The horn will sound once, indicating that the system has
“learned” that remote control.
7. Repeat step 6 for any additional remote controls.
8. Turn the vehicle ignition off to exit the programming mode. Test
all remote controls to ensure that they work properly.
Deleting Lost or Stolen Remote Controls from Your System
If one of your remote controls is lost or stolen, follow these instructions
IMMEDIATELY to remove the control code from your system.
1. Make sure that you have all remaining remote controls available.
2. Enter the control programming mode by following steps 1 - 5
of
Adding Remote Controls to Your System
.
3a. If you have only one remaining remote control, press the
START button on that remote control four (4) times, pausing at
least 1 second in between each press. Make sure that the horn
“honks” each time you press the START button.
3b.If you have two remaining remote controls, press the START
button on each remote control two (2) times, pausing at least 1
second in between each press. Make sure that the horn “honks”
each time you press the START button.
3c. If you have three remaining remote controls, press the START
button on one remote control twice, then press the START button
on the remaining remote controls once. Pause at least 1 second
between each press. Make sure that the horn “honks” each time
you press the START button.
4. Turn the vehicle ignition off to exit the programming mode.
When you are finished, the lost or stolen remote control will
no longer operate your system.
System Maintenance
(cont’d)
Содержание PowerCode PC 7300
Страница 11: ...11...
