Code Alarm caSEC Скачать руководство пользователя страница 23

Страница: 23 / 33

Feature Bank 2 - Security

1 - Silent Choice:

Controls the normal arm/disarm chirps of the security system.

ON -

Silent arming/disarming upon first press of lock/unlock, pressing lock/

unlock a second time will activate the arm/disarm chirps respectively. The

system will only sound the arm/disarm chirps upon a second press of the

lock/unlock buttons.

OFF -

Normal arm/disarm chirps upon the first press of lock/unlock.

2 - Door Locks:

Determines manual or automatic locking of the vehicle’s doors.

Active -

Requires use of the transmitter to lock the vehicle’s doors.

Passive -

Automatically locks the vehicle’s doors 1 minute after the last door

is closed.

Note: For Passive Locks, feature #3, System Arming, must also be set to

passive.

3 - System Arming:

Determines manual or automatic locking of the vehicle’s doors.

Active -

Requires use of the transmitter to arm the security system.

Passive -

Automatically arms the security system 1 minute after the last door

is closed.

4 - System Notifications:

This feature selects which output(s) will sound the

system’s arm/disarm chirps. This feature does not effect the triggered state of the

security system and during a triggered cycle, both the siren and horn outputs will

activate respectively.

Siren & Horn -

Siren and horn both sound when arming/disarming the system.

Siren Only -

Only the siren will sound when arming/disarming the system.

Horn Only -

Only the horn will sound when arming/disarming the system.

5 - Alarm Duration:

This feature controls the length of time the system will sound

when triggered.

30 Seconds -

When triggered, the system will sound the siren/horn for 30

seconds then stop. The unit will remain armed and may be triggered again.

60 Seconds -

When triggered, the system will sound the siren/horn for 60

seconds then stop. The unit will remain armed and may be triggered again.

Feature Descriptions

Содержание caSEC

































Результаты поиска

Содержание caSEC

Отзывы:

Похожие инструкции для caSEC

Бренды по названию

Популярные бренды

Code Alarm caSEC, Инструкция по установке и справочник

Результаты поиска

Содержание caSEC

Отзывы:

Похожие инструкции для caSEC

Бренды по названию

Популярные бренды