Code Alarm CA-500, Руководство по установке

Страница: 10 / 15

NOTE: Once you enter the programming mode, do not allow more that 15 seconds to pass between steps, or
the programming will be terminated.
10
PROGRAMMABLE FEATURES:
Feature LtsFlash1X Lts Flash 2X Lts Flash 3X Lts Flash 4X Default
1. Run Time 5 Min. 10 Min. 15 Min. 20 Min. 10 Min.
2. Ign. 2 Off During Crank On During Crank On
3. Parking Lights ON Flash Steady
4. Tach Mode Tachless Tach Tach
5. Voltage Level > .5V B4 Start < .5V B4 Start > 0.5
6. Diagnostics Off On Off
7. Door Locks 1 Sec/1 Sec 3.5 Sec/3.5 Sec 1 Sec/Dbl 1 Sec 1 Sec/1 Sec
8. Crank Time 0.8Sec 1.0 Sec 1.5 Sec 2.0 Sec 1.0
9. Gas/Diesel Gas Diesel 10 Diesel 15 Diesel 20 Gas
10.1 BTN Press Press & Hold 2 Press Start 2 Press Start
To Program Features:
1. Turn the ignition key to the ON position.
2. Press and release the program switch 3 times.
3. Immediately turn the ignition key OFF, then back to ON.
4. Press and release the program switch 2 times.
5. Use the STAR Button to advance to the feature that you want to change. EXAMPLE - If you need to change
programmable feature number 3, press and release the STAR Button 3 times in succession. The parking lights
will flash 3 times confirming that selected feature 3 can now be programmed.
6. Use the LOCK Button to change the selection of the programmable feature.